User's Manual

Using the CMC Web Interface 135
Server
Administrator
(continued)
Server Configuration Administrator:
• Set IP address
•Set gateway
• Set subnet mask
• Set first boot device
User Configuration Administrator:
• Set iDRAC root password
•iDRAC reset
Server Control Administrator:
• Power on
• Power off
• Power cycle
•Graceful shutdown
• Server Reboot
Test Alert User CMC users who have the Test Alert User privilege can send test
alert messages.
Debug
Command
Administrator
CMC users who have the Debug Administrator privilege can
execute system diagnostic commands.
Fabric A
Administrator
CMC users who have the Fabric A Administrator privilege can set
and configure the Fabric A IOM, which resides in either slot A1 or
slot A2 of the I/O slots.
Fabric B
Administrator
CMC users who have the Fabric B Administrator privilege can set
and configure the Fabric B IOM, which resides in either slot B1 or
slot B2 of the I/O slots.
Fabric C
Administrator
CMC users who have the Fabric C Administrator privilege can set
and configure the Fabric C IOM, which resides in either slot C1 or
slot C2 of the I/O slots.
Table 5-18. User Types
(continued)
Privilege Description