User's Manual

Using the CMC Web Interface 119
Viewing Status of the Temperature Sensors
The Temperature Sensors Information page displays the status and readings
of the temperature probes on the entire chassis (chassis, servers, IOMs,
and iKVM).
NOTE: The temperature probes value cannot be edited. Any change beyond the
threshold will generate an alert that will cause the fan speed to vary. For example,
if the CMC ambient temperature probe exceeds threshold, the speed of the fans on
the chassis increase.
To view the health status of the temperature probes:
1
Log in to the CMC Web interface.
2 Select Temperature Sensors in the system tree. The Temperature Sensors
Information
page displays.
Table 5-11. System Power Status
Item Description
Overall Power Health Indicates the health status (OK, Non-Critical,
Critical, Non-Recoverable, Other, Unknown)
of the power management for the entire chassis.
System Power Status Displays the power status (On, Off, Powering On,
Powering Off) of the chassis.
Redundancy Indicates the power supply redundancy status.
Values include:
No: Power Supplies are not redundant.
Yes: Full Redundancy in effect.