User's Manual

Using the CMC Web Interface 113
Viewing the Health Status of IOMs
The health status for the IOMs can be viewed in two ways: from the Chassis
Graphics section on the Chassis Status page or the I/O Modules Status page.
The Chassis Graphics page provides a graphical overview of the IOMs
installed in the chassis.
To view health status of the IOMs using Chassis Graphics:
1
Log in to the CMC Web interface.
2 The Chassis Status page is displayed. The right section of Chassis
Graphics
depicts the rear view of the chassis and contains the health
status for the IOMs. IOM health status is indicated by the color of
the IOM subgraphic:
• Green - IOM is present, powered on and communicating with the
CMC; there is no indication of an adverse condition.
• Amber - IOM is present, but may or may not be powered on, or may
or may not be communicating with the CMC; an adverse
condition may exist.
• Gray - IOM is present and not powered on. It is not communicating
with the CMC and there is no indication of an adverse condition.
3 Use the cursor to hover over an individual IOM subgraphic and a
corresponding text hint or screen tip is displayed. The text hint provides
additional information on that IOM.
4 The IOM subgraphic is hyperlinked to the corresponding CMC GUI
page to provide immediate navigation to the
I/O Module Status page
associated with that IOM.
The I/O Modules Status page provides overviews of all IOMs associated
with the chassis. For instructions on viewing IOM health through the
Web interface or RACADM, see "Monitoring IOM Health."