User's Manual

112 Using the CMC Web Interface
For information on how to launch the iDRAC management console and
single sign-on policies, see "Launching iDRAC using Single Sign-On."
Link Local
Address
IPv6 address assigned to the CMC based upon the MAC address
of the CMC.
Gateway Displays the IPv6 gateway for the iDRAC network interface.
IPv6 Address Displays an IPv6 address for the iDRAC network interface.
There may be up to 16 of these addresses. The prefix length,
if nonzero, is given after a forward slash ("/").
Table 5-8. Individual Server Status - WWN/MAC Address
Item Description
Slot Displays the slot(s) occupied by the server on the chassis.
Location Displays the location occupied by the Input/Output modules.
The six locations are identified by a combination of the group
name (A, B, or C) and slot number (1 or 2). Location names are:
A1, A2, B1, B2, C1, or C2.
Fabric Displays the type of the I/O fabric.
Server-Assigned Displays the server-assigned WWN/MAC addresses embedded in
the controller's hardware. WWN/MAC addresses showing N/A
indicate that an interface for the specified fabric is not installed.
Chassis-
Assigned
Displays the chassis-assigned WWN/MAC addresses used for the
particular slot. WWN/MAC addresses showing N/A indicate that
the FlexAddress feature is not installed.
NOTE: A green check mark in the Server-Assigned and
Chassis-Assigned columns indicates the type of active addresses.
NOTE: When FlexAddress is enabled, slots without servers installed
display the Chassis-Assigned MAC/WWN assignment for the
embedded Ethernet controllers (Fabric A). The Chassis-Assigned
addresses for fabrics B and C display N/A, unless these fabrics are in
use on servers in populated slots; it is assumed that the same fabric
types will be deployed in the unpopulated slots.
Table 5-7. Individual Server Status - IPv6 iDRAC Network Settings
(continued)
Item Description