Quick Reference Guide

90 RACADM Subcommands
LED state was set successfully.
• racadm setled -m server-9 -1 1
ERROR: Server in slot 9 is an extension of the
server in slot 1.
setniccfg
NOTE: To use this subcommand, you must have Administrator privilege.
Description
Sets the IP configuration for the specified module.
Usage
racadm setniccfg [-m < module >] [-d] [-o] [-6] [-s
<
ipaddress > < subnetmask > < gateway >] [-k < speed >
<
duplex >]
racadm setniccfg [-m <
module >] -d
racadm setniccfg [-m <
module >] -s < ipAddress >
<
netmask > < gateway >
racadm setniccfg [-m <
module >] -v [< vlan id > < vlan
priority
>]
racadm setniccfg [-m <
module >] -o
racadm setniccfg [-m <
module >] -k [< speed > < duplex >]
Options
Table 2-35 describes the setniccfg subcommand options.