Quick Reference Guide

88 RACADM Subcommands
setflexaddr
NOTE: To use this subcommand, you must have Chassis Configuration
Administrator privilege.
Description
Enables/disables FlexAddress on a particular slot/fabric.
NOTE: If the fabric type is determined to be Infiniband, the operation is canceled
and the command returns an error. If the FlexAddress feature is not activated, the
command will return an error.
NOTE: The server must be powered off to change the slot state. All servers must be
powered off to change the fabric state.
Usage
racadm setflexaddr [-i <slot#> <state>]
[-f <fabricName> <state>]
<slot#> = 1 to 16
<fabricName> = A, B, C
<state> = 0 or 1
where 0 is disable and 1 is enable
Options
Table 2-33 describes the setflexaddr subcommand options.
Example
• racadm setflexaddr -i 1 0
Table 2-33. setflexaddr Subcommand Options
Option Description
-i <slot#>
<
state>
Enables/disables FlexAddress for the specified slot.
-f
<
fabricName>
<
state>
Enables/disables FlexAddress for the specified fabric.