Quick Reference Guide

RACADM Subcommands 87
Usage
racadm setassettag -m chassis < asset tag >
Options
Table 2-32 describes the setassettag subcommand options.
Example
Input:
racadm setassettag -m chassis 783839–33
or
racadm setassettag 783839–33
The asset tag was changed successfully.
setchassisname
NOTE: To use this subcommand, you must have Administrator privilege.
Description
Sets the name of the chassis in the LCD.
Usage
racadm setchassisname <name>
Example
racadm setchassisname dellchassis-1
The chassis name was set successfully.
Table 2-32. setassettag Subcommand Options
Option Command
-m <module> Specifies the module whose asset tag you want to set.
Legal value: chassis
NOTE: Because there is only one legal value, you can
obtain the same output if you do not include this option.