Quick Reference Guide

RACADM Subcommands 79
Description
Send ICMP echo packets to a destination on the network.
Usage
racadm iping6 < IP address >
where <IP address> is the IPv6 address of the remote endpoint to ping.
Examples
racadm iping6 10.9.72.254
IPING6 10.9.72.254 (10.9.72.254): 56 data bytes
64 bytes from 10.9.72.254: icmp_seq=0 ttl=121 time=2.9
ms
--- 10.9.72.254 ping statistics ---
1 packets transmitted, 1 packets received, 0 percent
packet loss
round-trip min/avg/max = 2.9/2.9/2.9 ms
racdump
NOTE: To use this subcommand, you must have Administrator privilege.
Description
Displays the comprehensive chassis status and configuration state
information, as well as historic event logs. Used for post deployment
configuration verification and during debugging sessions.
Racdump includes the following subsystems and aggregates the following
RACADM commands:
Subsystem RACADM Command
General System/RAC information getsysinfo
Session information getssinfo
Sensor information getsensorinfo
Switches information (IO Module) getioinfo