Quick Reference Guide

72 RACADM Subcommands
Chassis Information:
System Model = PowerEdge M1000e
System Asset Tag = 00000
Service Tag = frankly
Chassis Name = franklin
Chassis Location = [UNDEFINED]
Power Status = ON
• racadm getsysinfo -A
"CMC Information:"
"Tue, 01 May 2007 02:33:47 AM
"1.3 (Build 06.12)" "" "Thu, 01 May 2007 02:12:43" "15"
"143.166.152.39" "143.166.152.1" "255.255.255.0" "1"
"00:11:43:FD:B4:39" "0.0.0.0" "0.0.0.0" "0" "1" "cmc-51186" ""
gettracelog
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays the diagnostic trace log for the CMC. The default output display
shows the record number, timestamp, source, and description. The
timestamp begins at midnight, January 1 and increases until the system
boots. During system boot, the timestamp displays as <system boot>.
After the system boots, the system’s timestamp is used.
Usage
From remote RACADM:
racadm gettracelog [-i]
racadm gettracelog [-s <
start record >] [-c < count >]
[-m]
From local RACADM:
racadm gettracelog [-s <
start record >] [-c <count>] [-
-more]
racadm gettracelog [-i]