Quick Reference Guide

RACADM Subcommands 71
Example
• racadm getsysinfo -c
CMC Information:
CMC Date/Time = Fri, 01 May 2009 02:33:47
Primary CMC Location = CMC-1
Primary CMC Version = 2.10
Standby CMC Version = 2.10
Last Firmware Update = Fri, 01 May 2009 02:12:43
Hardware Version = A01
CMC Network Information:
NIC Enabled = 1
MAC Address = 00:1E:4F:1F:53:71
Register DNS CMC Name = 1
DNS CMC Name = cmc-frankly
Current DNS Domain = fwad.lab
VLAN ID = 1
VLAN Priority = 0
VLAN Enabled = 0
CMC IPv4 Information:
IPv4 Enabled = 1
Current IP Address = 192.168.7.55
Current IP Gateway = 192.168.7.1
Current IP Netmask = 255.255.255.0
DHCP Enabled = 1
Current DNS Server 1 = 192.168.7.20
Current DNS Server 2 = 0.0.0.0
DNS Servers from DHCP = 1
CMC IPv6 Information:
IPv6 Enabled = 1
Autoconfiguration Enabled = 1
Link Local Address = fe80::21e:4fff:fe1f:5371/64
Current IPv6 Address 1 = 2009:123::e48f:9dd8:6f51:a669/64
Current IPv6 Address 2 = fd88:1::21e:4fff:fe1f:5371/64
Current IPv6 Address 3 = fd88:2::21e:4fff:fe1f:5371/64
Current IPv6 Gateway = fe80::21c:23ff:fe77:6215
Current IPv6 DNS Server 1 = 2009:123::1
Current IPv6 DNS Server 2 =
DNS Servers from DHCPv6 = 1
-4 Displays the CMC IPv4 information.
-6 Displays the CMC IPv6 information.
Table 2-25. getsysinfo Subcommand Options
Option Description