Quick Reference Guide

60 RACADM Subcommands
System Input Max Power Capacity = 0 W
Input Redundancy Reserve = 0 W
Input Power Allocated to Servers = 0 W
Input Power Allocated to Chassis Infrastructure = 51W
Total Input Power Available for Allocation = 0 W
Standby Input Power Capacity = 0 W
getraclog
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays the CMC log entries. The timestamp begins at midnight, January 1
and increases until the system boots. After the system boots, the system’s
timestamp is used.
Usage
racadm getraclog [-i]
racadm getraclog [-s <
start record >] [-c < count >]
[-more]
For remote RACADM:
racadm getraclog [-s <
start record >] [-c < count >]
[-m]
Options
Table 2-19 describes the getraclog subcommand options.
Table 2-19. getraclog Subcommand Options
Open Description
(none) Displays the entire CMC log, including the record number, time
stamp, source, and description of each event.
-s
<start record> Specifies the starting record used for the display
-c
<count> Specifies the maximum number of entries to be returned.