Quick Reference Guide

RACADM Subcommands 55
Examples
• racadm getniccfg
NIC Enabled = 1
IPv4 Enabled = 1
DHCP Enabled = 1
Static IP Address = 192.168.7.79
Static Subnet Mask = 255.255.255.0
Static Gateway = 192.168.0.1
Current IP Address = 192.168.7.62
Current Subnet Mask = 255.255.255.0
Current Gateway = 192.168.7.1
IPv6 Enabled = 1
Autoconfiguration Enabled = 1
Static IPv6 Address = ::/64
Static IPv6 Gateway = ::
Link Local Address = fe80::21e:4fff:fe1f:1701/64
Current IPv6 Address 1 =
2009:123::44b4:b2a0:b1ae:c1e6/64
Current IPv6 Address 2 =
fd88:1::21e:4fff:fe1f:1701/64
Current IPv6 Address 3 =
fd88:2::21e:4fff:fe1f:1701/64
Current IPv6 Gateway = fe80::21c:23ff:fe77:6215
Speed = Autonegotiate
Duplex = Autonegotiate
VLAN Enable = 0
Table 2-18. getniccfg Subcommand Options
Option Description
-m <module> Specifies the module whose network settings you want to view.
<module> may be any of the following:
• chassis
• server- n where n =1–16
•
switch- n where n =1–6
Default: chassis