Quick Reference Guide

RACADM Subcommands 47
<module> <LED state>
server-1 ON
racadm getled -m server-9
<module> <LED state>
server-9 Extension(1)
getmacaddress
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays the MAC/WWN addresses for all modules or for a specified module.
Usage
racadm getmacaddress [-m < module >] [-t iscsi]
racadm getmacaddress [-a]
Options
Table 2-16 describes the getmacaddress subcommand options.
Table 2-16. getmacaddress Subcommand Options
Option Description
-m <module> Specifies the module whose MAC address you want to view.
<module> may be one of the following:
• chassis
• server- n where n= 1–16
•
switch- n where n =1–6
-t Displays the iSCSI MAC addresses for all servers or the specified
server if used with -m option.
-a Displays the Ethernet and iSCSI MAC/WWN addresses for all
iDRAC/LOMs/mezzanine cards. When FlexAddress is enabled for
a particular slot, then the chassis-assigned MAC/WWN address is
displayed.