Quick Reference Guide

RACADM Subcommands 41
racadm getconfig -u root
• Display an indexed group:
racadm getconfig -g cfgUserAdmin -o
cfgUserAdminUserName -i 2
• Display information about the session information for a particular server:
racadm getconfig -g cfgSessionManagement -m
server-1
• Display information about the WEB/SSH/Telnet information for a server:
racadm getconfig -g cfgRacTuning -m server-1
• Display information about the remote syslog for a server:
racadm getconfig -g cfgRemoteHosts -m server-1
getdcinfo
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays general I/O module and daughter card configuration information.
NOTE: Fabric verification for server DCs is performed only when the chassis is
powered on. When the chassis is on standby power, the iDRACs on the server
modules remain powered off and thus are unable to report the server's DC fabric
type. The DC fabric type may not be reported in the CMC user interface until the
iDRAC on the server is powered on.
Usage
racadm getdcinfo
NOTE: The example output below is for a system with multi-slot servers.
Example
racadm getdcinfo
<Server#> <Presence> <DC1 Type> <DC1
State>
<DC2 Type> <DC2
State>
server-1 Present FibreChannel 8 OK Infiniband DDR OK