Quick Reference Guide

38 RACADM Subcommands
racadm getconfig -g < group > -i < index > -o < object >
racadm getconfig -u <
username >
racadm getconfig -h
Through remote RACADM only:
racadm getconfig -f <
filename >
Options
Table 2-12 describes the getconfig subcommand options.
NOTE: Not all CMC configuration groups are available with the -m option. For a list
of supported groups, see "Using RACADM to Configure Properties on iDRAC" in the
Dell Chassis Management Controller User Guide.
Property Groups
NOTE: "CMC Property Database Group and Object Definitions" on page 109,
provides details about these property groups. See also "config" on page 22.
NOTE: Configuration objects may be different between the groups accessed with
and without the -m option.
Table 2-12. getconfig Subcommand Options
Option Description
-g <group> Specifies the configuration group to display. Table 2-13 lists
the groups you can specify.
-o <object> Specifies the configuration object to display. Must be used
with the -g option.
-i <index> Specifies the index of an indexed group. Must be used with
the -g option. The index is specified by the index value (a
decimal integer from 1–16).
-u Displays the group associated with a specific user.
-h Displays a list of all available configuration groups.
-f <filename> Saves CMC configuration in a .cfg file using the specified file
name.
-m <module> Specifies the module you want to configure. Legal values are
server-n, where n=1-16.