Quick Reference Guide

RACADM Subcommands 33
racadm fwupdate -p -u -d < firmware image >
Options
Table 2-10 describes the fwupdate subcommand options.
Table 2-10. fwupdate Subcommand Options
Option Description
-d <path> Specifies the source path where the firmware image resides.
Default: designated TFTP default directory on that host for the
file if -g option is absent. If -g is used, defaults to directory
configured on the TFTP server
-g Downloads the firmware update using the TFTP server.
-u Performs the firmware update operation.
-a
< tftp server ip
address
>
Specifies the TFTP server IP address used for the firmware image
(used with -g).
NOTE: Only IPv4 TFTP server IP addresses are supported for CMC
version 2.10.
-f
<ftp server ip
address
>
<
username>
<
password>
Specifies the FTP server IP address used for the firmware image,
along with the username and password. Can only be used with
CMC, iKVM, and server iDRAC modules.
NOTE: Both IPv4 and IPv6 FTP server IP addresses are supported for
CMC version 2.10.