Quick Reference Guide

28 RACADM Subcommands
Example
• racadm deploy server-8 -s 192.168.0.20
255.255.255.0 192.168.0.1
The server was deployed successfully.
NOTE: The deploy command generates an error when used on the extension slot
of a multi-slot server.
• racadm deploy -m server-9 192.168.0.11
255.255.255.0 192.168.0.1
-u root Indicates that the <password> will be supplied
for the root user on the server. root is a constant
parameter, the only value that is valid with the -u
option.
-m <module> Specifies the server you want to configure.
Legal values: server-
n , where n =1–16
-p <password> Specifies the password for the root user on the
server.
-s <ipaddress subnet gateway> Sets the IP address, subnet mask, and gateway for
the specified server, separated by single spaces.
• ipaddress — A string representing a valid IP
address. For example, 192.168.0.20.
•
subnet — A string representing a valid subnet
mask. For example, 255.255.255.0.
•
gateway — A string representing a valid gateway
address. For example, 192.168.0.1.
-d Enables DHCP for the specified server.
NOTE: The -s and -d options cannot be used
together in the same command.
-6 Enables IPv6 auto configuration (when used with
-d)
Sets static IPv6 addresses (when used with -s)
Table 2-6. deploy Subcommand Options
Option Description