Quick Reference Guide

26 RACADM Subcommands
connect
Description
Connects to the switch or blade serial console.
NOTE: You cannot use this subcommand with remote RACADM.
Usage
• racadm connect [-b] <server-n>
• racadm connect [-b] <switch-n>
Options
Table 2-5 describes the connect subcommand options.
NOTE: If you use the -b option, reset the CMC to terminate the connect operation.
NOTE: See the Dell Chassis Management Controller User Guide for examples on
using the connect subcommand.
deploy
NOTE: To use this subcommand, you must have Server Administrator privilege.
Description
Configures the static IP address, subnet mask, gateway, and password for the
root user on the iDRAC for the specified server.
Table 2-5. connect Subcommand Options
Option Description
-b Connects to the switch or console using the binary
mode. This is an optional argument that requires a
server or a switch option.
server-n or
switch-n
Server or switch to connect to.
• server- n where n =1–16
•
switch- n where n =<a1 | a2 | b1 | b2 | c1 | c2>