Quick Reference Guide

RACADM Subcommands 23
Property Groups
NOTE: "CMC Property Database Group and Object Definitions" on page 109,
provides details about the property groups. See also "getconfig" on page 37.
NOTE: Configuration objects may be different between the groups accessed with
the -m option and without the -m option.
Table 2-4 lists the property groups that can be specified with the -g option.
.
-m <module> Specifies the module you want to configure. Legal value is
server-n, where n=1–16.
<value> Indicates the value that you want to set for the specified object.
While specifying <value>, the following rules apply:
• The following four characters must be escaped with a \
(backslash) character: $ " ` \ (dollar sign, double quote, back
quote, backslash).
• A single quote (’) cannot be used.
-f <filename> Specifies the file name to use as a configuration source. Valid
only through remote RACADM.
-c Specifies to perform validation but do not configure. Valid only
through remote RACADM.
-p Removes passwords from the configuration file. Valid only
through remote RACADM.
Table 2-4. RACADM Property Groups
Group Description
cfgLanNetworking Configures network related properties
cfgIPv6LanNetworking Configures IPv6-specific network related properties
cfgRemoteHosts Enables/disables and configures firmware update, SMTP e-
mail alerting, and NTP servers
cfgUserAdmin Configures CMC users
cfgEmailAlert Configures CMC e-mail alerting
Table 2-3. config Subcommand Options (continued)
Option Description