Quick Reference Guide

Using the LCD Panel Interface 159
3 Press the center button to confirm the change. The LCD Setup menu is
displayed.
Default Screen
The Default Screen allows you to change the screen that the LCD panel
displays when there is no activity at the panel. The factory default screen is
the Main Menu. You can choose from the following screens to display:
• Main Menu
• Server Status (front graphical view of the chassis)
•
Module Status (rear graphical view of the chassis)
•
Custom (Dell logo with chassis name)
The currently active default screen is highlighted in light blue.
1
Use the up and down arrow buttons to highlight the screen you want to set
to the default.
2 Press the center button. The Accept icon is highlighted.
3 Press the center button again to confirm the change. The Default Screen
is displayed.
Graphical Server Status Screen
The Graphical Server Status screen displays icons for each server installed in
the chassis and indicates the general health status for each server. The server
health is indicated by the color of the server icon:
• Gray — server is off with no errors
• Green — server is on with no errors
• Amber — server has one or more errors
• Black — server is not present
A blinking light blue rectangle around a server icon indicates that the server is
highlighted.
To view the Graphical Module Status screen:
1
Highlight the rotate icon.
2 Press the center button.
To view the status screen for a server: