Quick Reference Guide

CMC Property Database Group and Object Definitions 149
# cfgChassisInRedundancyReserve
Read only. Indicates the amount of redundant power (in watts) in reserve
that can be utilized in the event of an AC grid or PSU failure. This value is 0
if the Redundancy Policy is set to 0 (no redundancy).
# cfgChassisInPowerServerAllocation
Read only. Indicates (in watts) the cumulative power allocated to servers.
• Default: 7928
# cfgChassisInfrastructureInPowerAllocation
Read only. Indicates the estimated cumulative DC output power
consumption (in watts), determined from a field replaceable unit (FRU) on
the hardware modules in the chassis.
# cfgChassisTotalInPowerAvailable
Read only. Indicates the amount of power (in watts) available for use by the
chassis.
# cfgChassisStandbyInPowerCapacity
Read only. Indicates the amount of power (in watts) available for powering up
any hardware modules that are either added to the chassis or powered up (if
they are already present in the chassis).
# cfgChassisPowerClear
Write only. To reset cfgChassisMinPower and cfgChassisMaxPowerCapacity,
set this object to 1.
# cfgChassisPowerClearTimestamp
Read only. Time stamp when cfgChassisMinPower and
cfgChassisMaxPowerCapacity were reset.
cfgChassisPowerButtonEnable
Indicates if the chassis power button is enabled or disabled.
• Va lu e s: 0 (disabled), 1 (enabled)