Quick Reference Guide

CMC Property Database Group and Object Definitions 119
# cfgNicCurrentGateway
Displays the static gateway for the CMC IP address.
# cfgNicCurrentDhcpWasUsed
Indicates whether DHCP is used to configure the NIC:
0— address is static.
1— address was obtained from the DHCP server.
# cfgDNSCurrentServer1
Displays the IP address for DNS server 1.
# cfgDNSCurrentServer2
Displays the IP address for DNS server 2.
# cfgDNSCurrentDomainName
Displays the DNS domain name.
# cfgNicCurrentIPv4Enabled
Indicates whether IPv4 is enabled on the CMC. If the current property value
is set to 0 (false), the remote network interfaces to the CMC are not
accessible over IPv4.
Example
racadm getconfig -g cfgCurrentLanNetworking
# cfgNicCurrentIPv4Enabled=1
# cfgNicCurrentIpAddress=143.166.152.116
# cfgNicCurrentNetmask=255.255.255.0
# cfgNicCurrentGateway=143.166.152.1
# cfgNicCurrentDhcpWasUsed=0
# cfgNicCurrentVlanEnable=0
# cfgNicCurrentVlanID=1
# cfgNicCurrentVlanPriority=0
# cfgDNSCurrentServer1=192.168.0.5
# cfgDNSCurrentServer2=192.168.0.6
# cfgDNSCurrentDomainName=MYDOMAIN