Quick Reference Guide

106 RACADM Subcommands
Description
Tests the CMC SNMP trap alerting feature by sending a test trap from the
CMC to a specified destination trap listener on the network.
NOTE: This command is valid only if SNMP alerts are enabled on the CMC. For
more information about SNMP alerts, see the "Configuring SNMP and E-mail
Alerting" section in the Dell Chassis Management Controller User Guide. For
information on enabling and configuring traps, see "cfgTraps".
Usage
racadm testtrap -i <index>
Options
Table 2-46 describes the testtrap subcommand options.
Example
racadm testtrap -i 4
Test trap sent successfully.
traceroute
NOTE: To use this subcommand, you must have Administrator privilege.
Description
Traces a route using IP to a destination on the network.
Usage
racadm traceroute < IP address >
Examples
racadm traceroute 192.168.0.1
Table 2-46. testtrap Subcommand Options
Option Description
-i <index> Specifies the index of the trap configuration to use for the test.
Legal values: 1–4