User's Manual

322 Troubleshooting and Recovery
4 Click the Reset Components sub-tab. The Reset Components page
displays. The
CMC Summary section of the Reset Components page
displays the following information:
5 The Virtual Reseat Server section of the Reset Components page displays
the following information:
Table 11-12. CMC Summary
Attribute Description
Health OK The CMC is present and communicating with
its components.
Informational Displays information about the CMC when no
change in health status (OK, Warning, Severe)
has occurred.
Warning Warning alerts have been issued, and
corrective action must be taken within the
time frame set by the administrator. If
corrective actions are not taken within the
administrator-specified time, critical or severe
failures that can affect the integrity of the
CMC can occur.
Severe At least one failure alert has been issued.
Severe status represents a CMC system failure,
and corrective action must be taken
immediately.
Date/Time Displays the date and time for the CMC using the format
MM/DD/YYYY, where MM is the month, DD is the date, and YYYY
is the year.
Active CMC
Location
Displays the location of the primary CMC.
Redundancy
Mode
Displays Redundant if a standby CMC is present in the chassis, and
No Redundancy if no standby CMC is present in the chassis.
Table 11-13. Virtual Reseat Server
Attribute Description
Slot Displays the slot occupied by the server in the chassis. Slot names
are sequential IDs, from 1 to 16, to help identify the location of the
server in the chassis.