User's Manual

310 Troubleshooting and Recovery
3 Click the Summary tab. The Chassis Summary page displays.
Table 11-3, Table 11-4, Table 11-5, and Table 11-6 describe the information
provided.
Table 11-3. Chassis Summary
Item Description
Name
Displays the name of the chassis. The name identifies the
chassis on the network.For information on setting the name
of the chassis, see "Editing Slot Names" on page 94.
Model
Displays the chassis model or manufacturer. For example,
PowerEdge 2900.
Service Tag
Displays the service tag of the chassis. The service tag is a
unique identifier provided by the manufacturer for support
and maintenance.
Asset Tag
Displays the asset tag of the chassis.
Location
Displays the location of the chassis.
CMC Failover Ready
Indicates (Yes, No) whether the standby CMC (if present) is
capable of taking over in the event of a failover condition.
System Power Status
Displays the system power status.
Table 11-4. CMC Summary
Item Description
Primary CMC Information
Name
Displays the name of the CMC. For example, Primary CMC
or Standby CMC.
Description
Provides a brief description of the purpose of the CMC.
Date/Time
Indicates the date and time set on the active or primary
CMC.
Active CMC Location
Indicates the slot location of the active or primary CMC.
Redundancy Mode
Displays if the standby CMC is present in the chassis.
Primary Firmware
Version
Indicates the firmware version of the active or primary CMC.