User's Manual

Power Management 251
3 Click the Power Management tab. The Server Priority page appears,
listing all of the servers in your chassis.
4 Select a priority level (1–9, with 1 holding the highest priority) for one,
multiple, or all servers. The default value is 1. You can assign the same
priority level to multiple servers.
5 Click Apply to save your changes.
Using RACADM
Open a serial/Telnet/SSH text console to the CMC, log in, and type:
racadm config -g cfgServerInfo -o cfgServerPriority -i
<slot number> <priority level>
Where <slot number> (1–16) refers to the location of the server, and
<priority level> is a value between 1–9.
For example, the following command:
racadm config -g cfgServerInfo -o cfgServerPriority -i
5 1
sets the priority level to 1 for the server in slot 5.
Setting the Power Budget
NOTE: To perform power management actions, you must have Chassis Control
Administrator privilege.
Using the Web Interface
1 Log in to the CMC Web interface.
2 Click Chassis in the system tree. The Component Health page appears.
3 Click the Power Management tab. The Power Budget Status page appears.
4 Click the Configuration sub-tab. The Budget/Redundancy Configuration
page appears.