User's Manual

Using the CMC Web Interface 159
5 Set the remaining iDRAC Network Settings accordingly.
Table 5-27. QuickDeploy Settings
Setting Description
Slot Displays the slot occupied by the server on the chassis.
Selection of All Servers automatically fills the content of
the input fields of servers that are present. Slot numbers are
sequential IDs, from 1 to 16 (there are 16 slots available on
the chassis), that help identify the location of the server in
the chassis.
NOTE: When there are fewer than 16 servers occupying
slots, only those slots populated by servers display a slot
number.
Name Displays the server name of the server in each slot. By
default, the slots are named SLOT-01 to SLOT-16.
NOTE: The slot name cannot be blank or NULL.
Change Root Password Enables (when checked) the ability to change the password
of the iDRAC root user. The iDRAC Root Password and
Confirm iDRAC Root Password fields must be provided
for this operation to be successful.
LAN Enables (checked) or disables (unchecked) the LAN
channel.
NOTE: When LAN is not selected (disabled), all other network
configuration settings, (IPMI over LAN, DHCP, IP Address
Subnet Mask and Gateway) are not used. These fields are not
accessible.
IMPI over LAN Enables (checked) or disables (unchecked) the IPMI LAN
channel. LAN must be enabled to set this field.
DHCP If selected DHCP is used to acquire the iDRAC IP address,
subnet mask and default gateway, otherwise the values
defined in the iDRAC network configuration fields are
used. LAN must be enabled to set this field
IP Address The static IP address assigned to the iDRAC located in this
slot.
Subnet Mask Specifies the subnet mask assigned to the iDRAC installed
in this slot.