User's Manual

108 Using the CMC Web Interface
Viewing World Wide Name/Media Access
Control (WWN/MAC) IDs
The WWN/MAC Summary page allows you to view the WWN configuration
and MAC address of a slot in the chassis.
Fabric Configuration
The Fabric Configuration section displays the type of Input/Output fabric
that is installed for Fabric A, Fabric B, and Fabric C. A green check mark
indicates that the fabric is enabled for FlexAddress. The FlexAddress feature
is used to deploy chassis assigned and slot persistent WWN/MAC addresses
to various fabrics and slots within the chassis. This feature is enabled on a per
fabric and per slot basis.
NOTE: Refer to "Using FlexAddress" on page 173 for more information on the
FlexAddress feature.
WWN/MAC Addresses
The WWN/MAC Address section displays the WWN/MAC information that
is assigned to all servers, even if those server slots are currently empty.
Location displays the location of the slot occupied by the Input/Output
modules. The six slots are identified by a combination of the group name (A,
B, or C) and slot number (1 or 2): slot names A1, A2, B1, B2, C1, or C2.
Fabric displays the type of the I/O fabric. Server-Assigned displays the server-
assigned WWN/MAC addresses embedded in the controller's hardware.
Chassis-Assigned displays the chassis-assigned WWN/MAC addresses used
for the particular slot. A green check mark in the Server-Assigned or in
Chassis-Assigned columns indicates the type of active addresses. Chassis-
Assign addresses are assigned when FlexAddress is activated on the chassis,
and represents the slot-persistent addresses. When Chassis-Assigned
addresses are checked, those addresses will be used even if one server is
replaced with another server.