Quick Reference Guide

70 RACADM Subcommands

PING 10.9.72.252 (10.9.72.252): 56 data bytes

64 bytes from 10.9.72.252: icmp_seq=0 ttl=121 time=2.9

--- 10.9.72.252 ping statistics ---

1 packets transmitted, 1 packets received, 0 percent

packet loss

round-trip min/avg/max = 2.9/2.9/2.9 ms

racdump

NOTE: To use this subcommand, you must have Administrator privilege.

Description

Displays the comprehensive chassis status and configuration state

information, as well as historic event logs. Used for post deployment

configuration verification and during debugging sessions.

Racdump includes the following subsystems and aggregates the following

RACADM commands:

Subsystem RACADM Command

General System/RAC information getsysinfo

Session information getssinfo

Sensor information getsensorinfo

Switches information (IO Module) getioinfo

Mezzanine card information (Daughter

card)

getdcinfo

All modules information getmodinfo

Power budget information getpbinfo

KVM information getkvminfo

NIC information (CMC module) getniccfg

Redundancy information getredundancymode

Trace log information gettracelog