Quick Reference Guide
RACADM Subcommands 27
Example
• racadm deploy server-8 -s 192.168.0.20
255.255.255.0 192.168.0.1
The server was deployed successfully.
NOTE: The deploy command generates an error when used on the extension
slot of a multi-slot server.
• racadm deploy -m server-9 192.168.0.11
255.255.255.0 192.168.0.1
ERROR: Server in slot 9 is an extension of the
server in slot 1.
feature
NOTE: To use this subcommand to deactivate FlexAddress
™
, you must have
Chassis Configuration Administrator privilege. A user with login privileges can view
status only.
-m <module> Specifies the server you want to configure.
Legal values: server-
n
, where
n
=1–16
-p <password> Specifies the password for the root user on the
server.
-s <ipaddress subnet gateway> Sets the IP address, subnet mask, and gateway for
the specified server, separated by single spaces.
•
ipaddress —
A string representing a valid IP
address. For example, 192.168.0.20.
•
subnet —
A string representing a valid subnet
mask. For example, 255.255.255.0.
•
gateway —
A string representing a valid subnet
mask. For example, 192.168.0.1.
-d Enables DHCP for the specified server.
Table 2-5. deploy Subcommand Options
Option Description