Users Guide
For more information about the OMSA agent, see the Dell OpenManage Server Administrator User's Guide available at
dell.com/support/manuals.
4. To use the iDRAC DNS name as slot name, select Use iDRAC DNS Name for Slot Name option. This option replaces the static
slot names with the respective iDRAC DNS names, if it is available. If iDRAC DNS names are not available, the default or edited
slot names are displayed.
NOTE: To use the Use iDRAC DNS Name for Slot Name option, you must have the Chassis Conguration
Administrator privilege.
5. To save the settings, click Apply.
To restore the default slot name (SLOT-01 through SLOT-4) on the basis of a server's slot position) to a server, click Restore Default
Value
.
Conguring iDRAC network settings
To use this feature, you must have an Enterprise License. You can congure the iDRAC network conguration setting of a server. You
can use the QuickDeploy settings to congure the default iDRAC network conguration settings and root password for severs that
are installed later. These default settings are the iDRAC QuickDeploy settings.
For more information about iDRAC, see the iDRAC User’s Guide at dell.com/support/manuals.
Conguring iDRAC QuickDeploy network settings
Use the QuickDeploy Settings to congure the network settings for newly inserted servers.
To enable and set the iDRAC QuickDeploy settings:
1. In the left pane, click Server Overview → Setup → iDRAC.
2. On the Deploy iDRAC page, in the QuickDeploy Settings section, specify the settings mentioned in the following table. For
more information about the elds, see the Online Help.
Table 15. QuickDeploy settings
Setting Description
Action When Server is Inserted Select one of the following options from the list:
• No Action — No action is performed when the server is inserted.
• QuickDeploy Only — Select this option to apply iDRAC network settings when a
new server is inserted in the chassis. The specied auto-deployment settings are
used to congure the new iDRAC, which includes the root user password if
Change Root Password is selected.
• Server Prole Only — Select this option to apply server prole assigned when a
new server is inserted in the chassis.
• Quick Deploy and Server Prole — Select this option to rst apply the iDRAC
network settings, and then to apply the server prole assigned when a new server
is inserted in the chassis.
Set iDRAC Root Password on Server
Insertion
Select the option to change iDRAC root password to match the value provided in the
iDRAC Root Password eld, when a server is inserted.
iDRAC Root Password When the Set iDRAC Root Password on Server Insertion and QuickDeploy Enabled
options are selected, this password value is assigned to a server's iDRAC root user
password when the server is inserted into a chassis. The password can have 1 to 20
printable (including white spaces) characters.
Conrm iDRAC Root Password Allows you to retype the password provided in the Password eld.
Enable iDRAC LAN Enables or disables the iDRAC LAN channel. By default, this option is cleared.
Enable iDRAC IPv4 Enables or disables IPv4 on iDRAC. By default, this option is selected.
74