Users Guide
To log in as a local user, Active Directory user, or LDAP user.
1. In the Username eld, type your user name:
• CMC user name: <user name>
NOTE: The CMC user name can contain only alphanumeric characters and certain special characters. The at (@)
symbol and following special characters are not supported:
– Forward slash (/)
– Backward slash (/)
– Semicolon (;)
– Backward Quote (`)
– Quotations (“)
• Active Directory user name: <domain>\<user name>, <domain>/<user name> or <user>@<domain>.
• LDAP user name: <user name>
NOTE: This eld is case-sensitive.
2. In the Password eld, type the user password.
NOTE: For Active Directory user, the Username eld is case-sensitive.
3. In the Domain eld, from the drop-down menu, select the required domain.
4. Optionally, select a session timeout. This is the duration for which you can stay logged in with no activity before you are
automatically logged out. The default value is the
Web Service Idle Timeout.
5. Click OK.
You are logged into CMC with the required user privileges.
You cannot log in to the Web interface with dierent user names in multiple browser windows on a single workstation.
NOTE: If LDAP authentication is enabled and you attempt logging into CMC using the local credentials, the credentials
are rst checked in the LDAP server and then in CMC.
Logging into CMC using a smart card
To use this feature, you must have an Enterprise License. You can log in to CMC using a smart card. Smart cards provide Two Factor
Authentication (TFA) that provide two-layers of security:
• Physical smart card device.
• Secret code such as a password or PIN.
Users must verify their credentials using the smart card and the PIN.
NOTE: You cannot use the IP address to log in to CMC using the Smart Card login. Kerberos validates your credentials
based on the Fully Qualied Domain Name (FQDN).
Before you log in as an Active Directory user using a Smart Card, make sure to:
• Upload a Trusted Certicate Authority (CA) certicate (CA-signed Active Directory certicate) to CMC
• Congure the DNS server.
• Enable Active Directory login.
• Enable Smart Card login.
To log in to CMC as an Active Directory user using a smart card:
1. Log in to CMC using the link https://<cmcname.domain-name>.
The CMC Login page is displayed asking you to insert a smart card.
35