Users Guide

Conguring generic LDAP directory service using RACADM
To congure the LDAP directory service, use the objects in cfgLdap and cfgLdapRoleGroup RACADM groups.
There are many options to congure LDAP logins. In most of the cases, some options can be used with their default settings.
NOTE: It is highly recommended to use the racadm testfeature -f LDAP command to test the LDAP settings for
rst time setups. This feature supports both IPv4 and IPv6.
The required property changes include enabling LDAP logins, setting the server FQDN or IP, and conguring the base DN of the
LDAP server.
• $ racadm config -g cfgLDAP -o cfgLDAPEnable 1
• $ racadm config -g cfgLDAP -o cfgLDAPServer 192.168.0.1
• $ racadm config -g cfgLDAP -o cfgLDAPBaseDN dc=
company,dc=com
CMC can be congured to optionally query a DNS server for SRV records. If the cfgLDAPSRVLookupEnable property is enabled,
the cfgLDAPServer property is ignored. The following query is used to search the DNS for SRV records:
_ldap._tcp.domainname.com
ldap in the above query is the cfgLDAPSRVLookupServiceName property.
cfgLDAPSRVLookupDomainName is congured to be domainname.com.
For more information about the RACADM commands, see the Dell Chassis Management Controller for PowerEdge FX2/FX2s
RACADM Command Line Reference Guide available at dell.com/support/manuals.
104