CLI Guide

• Conguration of speed and duplex to autonegotiate:

racadm setniccfig -k

• Conguration of redundant mode:

racadm setniccfg -r 1

• Conguration of VLAN id and priority of a slot or all blades in a sleeve:

racadm setniccfg -i 5 -v 1000 7

• Conguration of CMC to a static IPv6 address:

racadm setniccfg -m chassis -s -6 2001:DB8::2 64 2001:DB8::1

• Conguration of server to use stateless autoconguration address:

racadm setniccfg -m server-1 -d -6

• Conguration of VLAN id and priority for a switch:

racadm setniccfg -m switch-1 -v 1000 7

• Removal of VLAN conguration from a switch:

racadm setniccfg -m switch-1 -v

setractime

Description Sets the date and time on the CMC.

To use this subcommand, you must have the Administrator privilege.

Synopsis

• racadm setractime -d <yyyymmddhhmmss.mmmmmmso>

• racadm setractime -l YYYYMMDDhhmmss

• racadm setractime -z {?|timezone|timezone-prex*}

Input

• -d — Sets the time in the string yyyymmddhhmmss.mmmmmmso where:

— yyyy is the year

— mm is the month

— dd is the day

— hh is the hour

— mm is the minutes

— ss is the seconds

— mmmmmm is the number of microseconds

— s is a + (plus) sign or a - (minus) sign, which indicates the sign of the oset.

— o is the oset in minutes

NOTE: 'O' is the oset in minutes from GMT and must be in 15-minute increments. The

timezone is represented as an oset from GMT, and the clock does not automatically

adjust to daylight savings time (for the '-d' option).

• -z <zone> - Sets the time zone by name or index, or lists possible time zones. For example,

PST8PDT (Western United States), 294 (Seoul), 344 (Sydney). <zone> may be:

— <?> lists the major timezone names/prexes.

RACADM Subcommand Details