CLI Guide

The following table describes the rmware update methods supported for each interface.
FW Update Method CMC
Local RACADM
No
Local RACADM—TFTP
No
Local RACADM—FTP
No
Remote RACADM
Yes
Remote RACADM—TFTP
Yes
Remote RACADM—FTP
Yes
Firmware RACADM—TFTP
Yes
Firmware RACADM—FTP
Yes
get
Description
Saves CMC conguration properties or CMC Event Filter congurations to a le.
NOTE: If CMC is not in the network, you cannot export the chassis conguration prole to a
remote network share with proxy using the get command. But, you can export the chassis
conguration prole to the local management station.
Synopsis
racadm get -f <filename>
racadm -r <CMC IP> -u <username> -p <password> get -f <filename>
racadm -r <CMC IP> -u <username> -p <password> get -f <filename> -t xml
racadm get -f <filename> -t xml -u <username> -p <password> -l <CIFS
share>
racadm get -f <filename> -t xml -l <NFS share>
Input
• –f: save event lter congurations to a le.
• -u: username of the remote share where the le must be exported.
• -p: password for the remote share where the le must be exported.
• -l: network share location where the le must be exported.
• -t: specify the le type that has to be exported. Valid value is “XML”.
• --clone: export the cloned conguration le. Only the XML le format is supported. The
conguration le can be exported to a local or remote share.
• --replace: export the replaced conguration le. Only XML le format is supported. The
conguration le can be exported to a local or remote share.
• --includeph: include password hash attributes
Example
• Export event lter congurations to a le by using remote racadm.
racadm -r 192.168.0.120 -u abc -p <password> get -f file.txt
• Export the CMC XML conguration to a local share using remote racadm
racadm -r 192.168.0.120 -u abc -p <password> get -f file.xml -t xml
• Export the CMC XML conguration to a CIFS share
racadm get -f file.xml -t xml -u myuser -p mypass -l //192.168.0.0/
share
RACADM Subcommand Details 31