Users Guide

If you try logging in to the member chassis using Launch CMC when both the leader and chassis are FIPS enabled or
disabled, you are directed to the Chassis Group Health page. Else, you are directed to the Login page of the member
chassis.
If a server in a chassis is the required destination:
a. Select the image of the destination chassis.
b. In the chassis image that is displayed in the Health section, select the server.
c. In the box labeled Quick Links, select the destination device. A new window is displayed with the destination page or
login screen.
NOTE: In MCM, all the Quick Links associated with the servers are not displayed.
Propagating Leader chassis properties to Member chassis
You can apply the properties from the leader to the member chassis of a group. To synchronize a member with the leader
properties:
1. Login with administrator privileges to the leader chassis.
2. Select the Lead chassis in the tree.
3. Click Setup > Group Administration.
4. In the Chassis Properties Propagation section, select one of the propagation types:
● On-Change Propagation — Select this option for automatic propagation of the selected chassis property settings. The
property changes are propagated to all current group members, whenever lead properties are changed.
● Manual Propagation — Select this option for manual propagation of the chassis group leader properties with its
members. The lead chassis property settings are propagated to group members only when a lead chassis administrator
clicks Propagate.
5. In the Propagation Properties section, select the categories of lead configuration properties to be propagated to member
chassis.
Select only those setting categories that you want identically configured, across all members of the chassis group. For
example, select Logging and Alerting Properties category, to enable all chassis in the group to share the logging and
alerting configuration settings of the lead chassis.
6. Click Save.
If On-Change Propagation is selected, the member chassis take on the properties of the leader. If Manual Propagation is
selected, click Propagate whenever you want to propagate the chosen settings to member chassis. For more information on
propagation of leader chassis properties to member chassis, see the Online Help.
Synchronizing a new Member with Leader chassis properties
You can apply the properties from the leader to a newly added member chassis of a group. To synchronize a new member with
the leader properties:
1. Log in with administrator privileges to the leader chassis.
2. Select the lead chassis in the tree structure.
3. Click Setup > Group Administration.
4. While adding a new member to the group, in the Chassis Group page, select Sync New Member with Leader Properties.
5. Click Apply. The member takes on the properties of the leader.
The following configuration service properties of several systems within the chassis are affected after synchronization:
Table 14. Configuration Service Properties
Property Navigation
SNMP configuration In the left pane, click Chassis Overview > Network > Services > SNMP.
Chassis remote logging In the left pane, click Chassis Overview > Network > Services > Remote Syslog.
User authentication using LDAP
and Active Directory services
In the left pane, click Chassis Overview > User Authentication > Directory Services.
66 Configuring CMC