Release Notes
Dell - Internal Use - Confidential
Important Notes
CMC network default setting is Static with IP address of "192.168.0.120". Complete the CMC
network setup by directly connecting a client system on the same network. For more information,
see the Chassis Management Controller for PowerEdge FX2 Version 1.40 User's Guide available at
dell.com/support/manuals.
Connecting the STK/Gb2 port of the CMC, located at the back of the chassis, to the management
network can cause network disruption if not properly cabled and configured in CMC. Before using
the STK/Gb2 port of the CMC, see the PowerEdge FX2 Version 1.40 Owner's Manual available at
dell.com/support/manuals.
The PCIe cards are allocated to sleds based on the sled type, for more information, see the Chassis
Management Controller for PowerEdge FX2 Version 1.40 User's Guide available at
dell.com/support/manuals. This is applicable to Dell PowerEdge FX2s chassis.
Some advanced features require CMC enterprise license. For more information about the CMC
licenses, see the Chassis Management Controller for PowerEdge FX2 Version 1.40 User's Guide
available at dell.com/support/manuals.
Storage features using Storage Sleds require a storage license. For more information about storage
licenses, see the Chassis Management Controller for PowerEdge FX2 Version 1.40 User's Guide
available at dell.com/support/manuals.
When Certificate Validation is “Enabled”, FQDN of the system should be provided. If the IP address
of the Domain Controller is specified when the certificate validation is enabled, the Active Directory
login may not work.
The cfgRacTuneIdracDNSLaunchEnable object and the "iDRAC Launch Method" setting on the
Chassis Overview > Setup > General CMC Graphical Interface requires the Chassis Configuration
Administrator privilege.
Microsoft Windows Server 2012, Windows Server 2008 R2, Windows 7 do not support TLS 1.2 and
TLS 1.1. Install update below to enable TLS 1.2 and TLS 1.1 as a default secure protocols in
WinHTTP in Windows. For details, see the Microsoft knowledge base article 3140245 at
support.microsoft.com.
Supports LDAP authentication with OPEN-DS. OPEN-DS must have DH key larger than 768 bits.