Users Guide

An Operation Successful message is displayed. The current VLAN settings that are assigned to the IOMs are displayed in the
VLAN Assignment Summary field.
Resetting VLANs for IOMs using CMC web interface
To reset VLANs for IOM(s) to default configurations using the CMC Web interface:
1. Go to I/O Module Overview, and click Setup → VLAN Manager.
The VLAN Manager page is displayed.
2. In the Select I/O Module section, select the required IOMs.
3. In the Edit VLANs section, select Reset VLANs in the drop down list and click Apply.
A warning message is displayed indicating that the configurations of the existing VLANs will be overwritten with the default
configurations.
4. Click OK to confirm.
The VLANs are assigned to the selected IOMs according to the default configurations.
An Operation Successful message is displayed. The current VLAN settings that are assigned to the IOMs are displayed in the
VLAN Assignment Summary field.
NOTE: The Reset to All VLANs option is not supported in IOAs in Virtual Link Trunking (VLT) mode.
131