Reference Guide
• racadm getsysinfo
sshpkauth
Description Enables you to upload and manage up to four dierent SSH public keys per user. You can upload
a key le or key text, view keys, or delete keys.
RSA key size should be between 768 and 4096 and the recommended DSA key size is 1024.
This command has three mutually exclusive modes—upload, view, and delete that are
determined by the options.
Upload
The upload mode allows you to upload a keyle or to copy the key text on the command line. You
cannot upload and copy a key at the same time.
Remote RACADM:
racadm sshpkauth -i <2 to 16> -k <1 to 4> -f <filename>
racadm sshpkauth -i <2 to 16> -k <1 to 4> -t
<key-text>
Telnet/ssh/serial RACADM:
racadm sshpkauth -i <2 to 16> -k <1 to 4> -t
<key-text>
View
The view mode allows the user to view a key specied by the user or all keys.
racadm sshpkauth -i <2 to 16> -v -k <1 to 4>
racadm sshpkauth -i <2 to 16> -v -k all
Delete
The delete mode allows the user to delete a key specied by the user or all keys.
racadm sshpkauth -i <2 to 16> -d -k <1 to 4>
racadm sshpkauth -i <2 to 16> -d -k all
Synopsis
racadm sshpkauth
NOTE:
For DSA keys greater than 2048, use the following racadm command. CMC accepts RSA keys
up to key strength 4096, but the recommended key strength is 1024.
racadm -r 192.168.8.14 -u root -p <default root user password>
sshpkauth -i svcacct -k 1 -p 0xfff -f dsa_2048.pub
Input
• -i < user index > - Index for the user. <user index> must be between 2 and 16 on iDRAC.
• -k [< key index > | all] - Index to assign the PK key being uploaded. all only works with the -v
or -d options. <key index> must be between 1 and 4 or all on iDRAC.
• -t < PK Key Text > - Key text for the SSH Public key.
• -f < lename > - File containing the key text to upload. The -f option is not supported on
Telnet/ssh/serial RACADM.
• -v - View the key text for the index provided.
• -d - Delete the key for the index provided.
80