Reference Guide

• racadm getmacaddress -c IO-Identity

• racadm getmacaddress -c Flexaddress

• racadm getmacaddress -c Factory

• racadm getmacaddress -c all

Input

• -m < module > — Species the module whose MAC address you want to view.

< module > may be one of the following:

server-n , where n=1–4

switch-n , where n=1–2

• -t — Displays the iSCSI MAC addresses for all servers or the specied server if used with -m

option.

• -x — Displays the extra MACs (Ethernet or iSCSI) for servers with additional LOM MACs and

must be used with -m option.

• -a — Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/LOMs/mezzanine

cards. When FlexAddress is enabled for a particular slot, then the chassis-assigned

MAC/WWN address is displayed.

• -c— Displays the Ethernet, iSCSI, MAC/WWN, assignment type, and partition status of all

LOMs or mezzanine cards. Valid values for -c option are:

– IO-Identity — Displays the user-dened MAC/WWN addresses.

– FlexAddress — Displays the chassis assigned WWN/MAC addresses.

– Factory — Displays the MAC/WWN addresses for all LOMs or mezzanine cards.

– all — Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.

Example

• Displays the NDC or LOM MAC address.

racadm getmacaddress

• Display iSCSI MAC addresses for all servers.

racadm getmacaddress -t iscsi

• Display iSCSI MAC for server-1.

racadm getmacaddress -m server-1 -t iscsi

• Display extra iSCSI MACs for server-1 (if available).

racadm getmacaddress -m server-1 -t iscsi -x

• Displays the user-dened MAC and WWN address.

– racadm getmacaddress -c io-identity

– racadm getmacaddress -c io-identity -m server -2

• Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.

racadm getmacaddress -c all

• Displays the chassis assigned WWN/MAC address.

racadm getmacaddress -c flexaddress

• Displays the MAC/WWN addresses for all LOMs or mezzanine cards.

racadm getmacaddress -c factory

Displays the MAC address for chassis.

racadm getmacaddress -m chassis