Reference Guide

<IO> <Name> <Type>
<Presenc
e> <POST> <Power> <Role>
<SecureM
ode> <Mode>
Switch-
1
1GBE PASS-
THROUGH
MODULE
Gigabit
Ethernet
Present OK ON Master No N/A
getled
Description Displays the LED settings on a module: blinking, not blinking, or unknown (for empty slots).
To use this subcommand, you must have the Login User privilege.
Synopsis
racadm getled -m <module>
Input CMC only options:
-m < module > — Species the module whose LED settings you want to view.
< module > can be one of the following:
• server-n where n=1 or 4
• switch-n where n=1 or 2
• chassis
• CMC active
Example For CMC:
• racadm getled -m server-4
<module> <LED state> server-4 Blinking
• racadm getled -m chassis
<module> <LED state> server-4 Not blinking
• racadm getled -m server-1
<module> <LED state> server-1 ON
• racadm getled -m server-1
<module> <LED state> server-1 Extension(1)
getmacaddress
Description
Displays the MAC/WWN addresses for all modules or for a specied module.
The decoder values in the Type column indicate the protocols of the network cards.
• 0— Unsupported
• 1— ISCSI
• 2— FCoE-FIP
• 3— iSCSI/FCoE-FIP
To use this subcommand, you must have the CMC Login User privilege.
Synopsis
• racadm getmacaddress
• racadm getmacaddress -m chassis
• racadm getmacaddress -m switch-<n>
• racadm getmacaddress [-m <module>] [-t iscsi] [-x]
• racadm getmacaddress [-a]
38