Reference Guide
NOTE: When the FlexAddress and FlexAddressPlus features are active, deactivating
one of them results in deactivation of the other feature also. However,
ExtendedStorage is not aected by the deactivation of FlexAddress or FlexAddresPlus.
• -r — Repair damaged/unformatted ExtendedStorage media.
NOTE: The –r switch requires that the ExtendedStorage feature be deactivated.
CAUTION: Using the -r switch reformats the SD media in the CMC cardslot. Any
existing ExtendedStorage data will be lost.
• -c — <featurename> must be one of the following:
• flexaddress (with -d)
• flexaddressplus (with -d) ExtendedStorage (with -d or -r)
featurecard
Description Veries proper SD card installation and displays the SD card status.
To use this subcommand, you must have the Chassis Conguration Administrator privilege.
Synopsis
racadm featurecard -s
Input -s — Lists active SD card features and SD card status.
Output
An example of output is given here.
racadm featurecard -s
CMC: The feature card inserted is valid, serial number =
CN0H871T137401112222A00 The feature card contains the following
feature(s):
FlexAddress: bound
FlexAddressPlus: bound
ExtendedStorage: bound
fwupdate
Description
Allows you to update the CMC rmware, chassis infrastructure rmware. You can:
• Check the rmware update process status.
• Update the rmware from an FTP or a TFTP server by providing an IP address and optional
path.
• Update the rmware from the local le system using remote RACADM.
• The subcommand updates one or more devices of a single type at a time.
To use this subcommand, you must have the Chassis Conguration Administrator privilege.
NOTE: Running the subcommand to update the CMC rmware resets the CMC,
causing all network connections to get logged o.
NOTE: The subcommand generates an error, when used on the extension slot of a
multi-slot server.
The CMC rmware performs a signature verication step to ensure the authenticity of the
uploaded rmware. The rmware update process is successful only if CMC authenticates the
rmware image from the service provider as valid image. The rmware update process is
27