Reference Guide

Default 5
cfgRacTuneIpBlkFailWindow (Read/Write)
Description Denes the time span in seconds that the failed attempts are counted. When failure attempts age
beyond this limit, they are dropped from the count.
Legal Values
2–65535
Default 60
cfgRacTuneIpBlkPenaltyTime (Read/Write)
Description Denes the time span in seconds that session requests from an IP address with excessive failures
are rejected.
Legal Values
2–65535
Default 300
cfgRacTuneSshPort (Read/Write)
Description
Species the port number used for the SSH interface.
Legal Values
10–65535
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 111, 123,
161, 546, 801, 4096, 5988, 5989, 6900, 9000, 60106.
Default 22
cfgRacTuneTelnetPort (Read/Write)
Description
Species the port number used for iDRAC or CMC Telnet interface.
NOTE: For CMC, the following port numbers are reserved and cannot be used: 21, 68,
69, 111, 123, 161, 546, 801, 4096, 5988, 5989, 6900, 9000, 60106.
Legal Values
• For CMC: 10 – 65535
• For iDRAC: 1 – 65535
Default 23
cfgRacTuneDaylightOset (Read Only)
Description
Species the daylight savings oset (in minutes) to use for the RAC Time. This value is 0 if the time
zone is not a Daylight Saving time zone.
Legal Values 0 – 60
Default 0
106