Connectivity Guide

Description Indicates whether the physical disk supports the T10 PI (Protection Information).
These protection elds are known as DIF (Data Integrity Fields). Possible values:
1. Not one of the following.
2. Capable of supporting T10 PI.
3. Not capable of supporting T10 PI.
Syntax INTEGER
Access read-only
Table 276. Physical Disk Block Size In Bytes
Name
physicalDiskBlockSizeInBytes
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.58
Description The block size (in bytes) of the physical disk. This is not applicable for NVMe
devices. Possible values:
1. 512
2. 4096
Syntax INTEGER
Access read-only
Table 277. Physical Disk Protocol Version
Name
physicalDiskProtocolVersion
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.59
Description Applicable for NVMe devices only. The NVMe protocol version supported by the device.
Syntax DisplayString
Access read-only
Table 278. Physical Disk PCIe Negotiated Link Width
Name
physicalDiskPCIeNegotiatedLinkWidth
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.60
Description Applicable for NVMe devices only. The PCIe link width negotiated with the host during
device initialization.
Syntax INTEGER
Access read-only
Table 279. Physical Disk PCIe Capable Link Width
Name
physicalDiskPCIeCapableLinkWidth
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.61
Description Applicable for NVMe devices only. The PCIe link widths the device is capable of
supporting.
Syntax INTEGER
Access read-only
72