User's Manual

3. In the Timeout field, enter the time for which the Ride-through feature to be enabled.
Type either zero (0) or a value from 60–1800 seconds. Zero indicates an infinite timeout.
4. Click Apply.
Configuring PCIe Ride-through Properties Status Using RACADM
You can configure the PCIe power ride-through properties, by running the following commands:
• To disable the Ride-through feature, run the command, racadm setpciecfg ridethru –d
• To enable the Ride-through feature, run the command, racadm setpciecfg ridethru –e
• To reset the Ride-through timeout property, run the command, racadm setpciecfg ridethru –
t <timeout>
• To set the acceptable timeout range, run the command, racadm setpciecfg help ridethru
For more information, see the Chassis Management Controller for PowerEdge VRTX RACADM Command
Line Reference Guide.
194