Reference Guide

cfgADDcSRVLookupDomainName (Read/Write)
Description This is the Active Directory Domain to use when
cfgAddcSrvLookupbyUserDomain is set to 0.
Legal Values String. Maximum length = 254
Default Null
cfgADDcSRVLookupEnable (Read/Write)
Description Configures CMC to use pre‑configured domain controllers
or to use DNS to find the domain controller. If using
pre‑configured domain controllers, then the domain
controllers to use are specified under
cfgAdDomainController1, cfgAdDomainController2, and
cfgAdDomainController3. CMC does not fail over to the
specified domain controllers when DNS lookup fails or
none of the servers returned by the DNS lookup works.
Legal Values
• 1 (TRUE)—use DNS to look up domain controllers
• 0 (FALSE)—use pre‑configured domain controllers
Default 0
cfgADGcRootDomain (Read/Write)
Description The name of the Active Directory root domain used for
DNS look up, to locate Global Catalog servers.
Legal Values String. Maximum character length = 254
Default Null
cfgADGcSRVLookupEnable (Read/Write)
Description Determines how the global catalog server is looked up. If
using pre‑configured global catalog servers, then CMC
uses the values cfgAdGlobalCatalog1,
cfgAdGlobalCatalog2, and cfgAdGlobalCatalog3.
Legal Values
• 0(FALSE)—use pre‑configured Global Catalog Servers
(GCS)
• 1(TRUE)—use DNS to look up GCS
Default 0
cfgADSpecifyServerEnable
Description
Allows you to enable or disable and specify an LDAP
server or a global catalog server. Use
127