Quick Reference Guide

– pcap — Reset Power Cap properties to the default value.

– flex — Reset FlexAddress properties to the default value. The default setting is “enabled”.

– dpse — Reset Dynamic Power Supply Engagement to the default value. The default setting

is “disabled”.

NOTE: The –c option is valid with only <module=chassis>.

Example

• Perform reset of configuration data to defaults for server-1 module

racadm racresetcfg -m server-1

• Perform reset of power cap feature.

racadm racresetcfg -c pcap

• Perform reset of configuration data to default for switch-1 module

racadm racresetcfg -m switch-1

racresetpcie

Description Resets the PCIe devices in the chassis to factory defaults.

NOTE: To use this subcommand for CMC, you must have the Chassis

Administrator privilege.

Synopsis

racadm racresetpcie

raid

Description Allows you to execute commands to control RAID arrays.

To use this subcommand for CMC you must have Chassis Administartor privilege.

Synopsis

racadm raid

Example

• Monitor Health of Storage root node

racadm raid get status

Storage Root Node Status : Ok

This command retrieves the controllers keys, (FQDDs.)

• Monitor and Inventory all Controllers connected to the server

racadm raid get controllers

racadm raid get controllers -o

This command is an optimized version and displays the full controller objects along with their keys.

racadm raid get controllers -o -p <property names separated by comma>

This command displays the filtered property values for all returned controller objects.

• Monitor and Inventory all batteries connected to the controller

racadm raid get batteries --refkey <controller FQDDs

separated by comma>