Quick Reference Guide

NOTE: The -A and -o options are deprecated.

Output The default output display shows the record number, timestamp, source, and description. The

timestamp begins at midnight, January 1 and increases until the system boots. After the system

boots, the system’s timestamp is used.

Example

Record: 1

Date/Time: Dec 8 08:21:30

Source: ssnmgrd[175]

Description: root from 143.166.157.103: session timeout

sid 0be0aef4

getversion

Description

Displays the current firmware version of various modules in the chassis, iDRAC version on the

attached servers, and whether the target device can be updated.

NOTE: To use this subcommand, you must have CMC Login User privilege.

Synopsis

• racadm getversion

• racadm getversion [-b | -c] [-m <module>]

• racadm getversion -l [-m <module>] [-f <filter>]

Input

NOTE: The -b, -c and -l options are not available for CMC modules.

NOTE: The -l option requires that the Lifecycle Controller service is enabled on the servers. For

version information, see the RACADM Readme available at dell.com/support/manuals.

• (none) — Displays the version information for all targets or devices.

Updatable>

server-4 1.30.30 (Build 26) PowerEdge M620

iDRAC7 Y

cmc-1 1.00.X23.201211271524 Y

Main Board 1.00.X08.201210242214

System.Chassis.1#Infrastructure.1

PERC H710PV Mini 23.8.0-0007

RAID.ChassisIntegrated.1-1

PL100 0:0 0.12

Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

Physical Disk 0:0:0 ES65 Disk.Bay.

0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

• -b - Displays the server's current BIOS version (default is iDRAC version).

• -c - Displays the server's current CPLD version.