Users Guide
5. Select one of the following options:
– Reboot Now - Restart the server immediately.
– On Next Reboot - Manually restart the server at a later time.
NOTE: This task is not valid for Lifecycle Controller and 32–bit Diagnostics firmware update. A
server restart operation is performed immediately for these devices.
6. Click Update. The firmware version is updated for the selected component or device.
Deleting Scheduled Server Component Firmware Jobs
NOTE: To use this feature, you must have an Enterprise License.
You can delete jobs scheduled for the selected components and/or devices across one or more servers.
Deleting Scheduled Server Component Firmware Jobs Using the Web
Interface
To delete scheduled server component firmware jobs:
1. In the left pane, click Server Overview, and then click Update.
2. On the Server Component Update page, filter the component or device (optional).
3. In the Job Status column, if a check box is displayed next to the job status, it implies that a Lifecycle
Controller job is in progress and currently in the indicated state. It can be selected for a job-deletion
operation.
4. Click Delete Job. The jobs are deleted for the selected components or devices.
Updating Storage Component Using CMC Web Interface
Make sure the DUPs for the required storage components are downloaded.
To update the storage components:
1. In the left pane, click Chassis Overview → Storage → Update.
2. On the Storage Component Update page, click Browse.
The Choose to Upload File dialog box is displayed
3. Browse to location where the required DUP file was downloaded and saved from the Dell support
Site and select the DUP file, and click Open.
The DUP file name and path are displayed in the Browse field.
4. Click Upload.
The DUP is uploaded to CMC. The Storage Component Update section displays only the
components that are supported by the downloaded DUP file. The current version, latest available
version and the Update check box are displayed for the components.
5. Select the appropriate Update check boxes for the required components.
6. Click Update.
The firmware update action is initiated for the selected components. The progress is displayed in the
Update column
After the action is complete, an appropriate message is displayed to indicate the completion or
failure of the firmware update.
61