Users Guide

To map the server to the KVM using the LCD — From the Main Menu screen on the LCD, go to KVM
Mapping, select the server that must be mapped, and then press OK.
Mapping a Server to a DVD Drive
To map the server to the chassis DVD drive:
1. In the left pane, click Chassis Overview → Front Panel → Setup .
2. On the Front Panel Configuration page, under the DVD Drive Configuration section:
From the DVD Mapped drop-down menu, select one of the servers. Select the servers for which
chassis DVD drive access is required.
3. Click Apply.
The DVD allows mapping to all the server slots. Inserting a full–height or replacing a half–height server
with full–height server does not change the mapping behavior. However, if the DVD is mapped to a lower
slot and the slot has a full–height server, then the DVD is available only through the upper slot. You must
remap the DVD to the upper slots.
41